bigkav Report post Posted March 7, 2008 UVP 1 Now the game runs alot better, less laggy good effects, but im missing atm is that my log in info says i need newer drivers, but when i upgraded them id screwed all my graphics up bigtime every thing looked like it was coloured in with crayons and i couldnt launch EL at all, i had to revet my driver to play EL again and to get my graphics back and also when i upgraded the driver it would not let me change to screen resoloution. although is it normal i cant change the water shader from 0? ~bigk Share this post Link to post Share on other sites
Puntif Report post Posted March 7, 2008 UVP: 1 The only "problem" I see is that not all flowers are harvestable in one patch of flowers, as far as the harvest icon. Also depends on what angle I am at. Some angles are easier than others to get the harvest icon to show. Besides that everything looks good. I was having no problems with RC10 until yesterday I tried to harvest some red roses in Palon Vertas near 175,140. I found that I had to hunt around to find a harvestable pixel for them. If I switch to the eyeball cursor, I mostly get "you see a dirt mound" as if the flower wasn't there at all. I tried RC9 and still had the problem. Switching to EL.EXE I had no problem clicking those roses anywhere. I guess this is the same problem as Cissysauce has. Share this post Link to post Share on other sites
Khalai Report post Posted March 7, 2008 UVP: 1 The only "problem" I see is that not all flowers are harvestable in one patch of flowers, as far as the harvest icon. Also depends on what angle I am at. Some angles are easier than others to get the harvest icon to show. Besides that everything looks good. I was having no problems with RC10 until yesterday I tried to harvest some red roses in Palon Vertas near 175,140. I found that I had to hunt around to find a harvestable pixel for them. If I switch to the eyeball cursor, I mostly get "you see a dirt mound" as if the flower wasn't there at all. I tried RC9 and still had the problem. Switching to EL.EXE I had no problem clicking those roses anywhere. I guess this is the same problem as Cissysauce has. As do I. Since RC7, I am experiencing same problem. My screen has always been on 32bpp, so this won't be that problem. Share this post Link to post Share on other sites
Schmurk Report post Posted March 7, 2008 The flower selection bug is related to the new selection method. It has already been reported here. Share this post Link to post Share on other sites
JimP Report post Posted March 7, 2008 Log started at 2008-03-07 14:48:13 localtime (Eastern Standard Time) [14:48:13] Using the server profile: test [14:48:14] no bone with name 'arrow' found in skeleton! [14:48:19] Unable to read missiles definition file actor_defs/missile_defs.xml [14:48:20] Error: Can't open file "quest.log" [14:48:20] * server www.eternal-lands.com filename http://www.eternal-lands.com/updates150/files.lst [14:48:20] Downloading http://www.eternal-lands.com/updates150/files.lst from www.eternal-lands.com [14:48:20] Finished downloading http://www.eternal-lands.com/updates150/files.lst [14:48:21] * server www.eternal-lands.com filename http://www.eternal-lands.com/updates/custom_files.lst [14:48:21] Downloading http://www.eternal-lands.com/updates/custom_files.lst from www.eternal-lands.com [14:48:21] Finished downloading http://www.eternal-lands.com/updates/custom_files.lst [14:54:46] Unable to add command 25 - 20 [14:54:46] Unable to add command 20 - 6195 [14:54:47] missiles_fire_arrow: -1 is not a valid missile type for shield 7 of actor type 1 Share this post Link to post Share on other sites
love42 Report post Posted March 7, 2008 thought i replied earlier but i guess it didn't take uvp 0 Only problem I have come across is in the room under the inn in EVTR. It is the same problem I had with the last client release that the no clusters exe fixed. When I enter the room all is fine as long as I don't move or change view. If I walk to the wine rack to enter the mine or change the view my monitor gose all black for a few seconds (like it would if I was changing from or to full screen mode.) Then when I can see again the EL screen is all messed up and then it goes black again and when it comes back El is frozen. I can't alt x to close or anything. Even useing ctrl alt delete n telling it to close wont close EL. I have to shutdown my comp n restart in order to get it to close so I can play again. I say EL is frozen cause I can still do other things like use my browser n view webpages, but not EL. I'm sorry if this has been reported already but I have read through most of this post and didn't see it so I wanted to mention it just in case. Other then this problem I had no other problems at all. Share this post Link to post Share on other sites
Sir Christo Report post Posted March 8, 2008 UVP: 0 (is that bad?) There is minor lag and some resyncs but other than that it is working fine P.S I got the download thing working Share this post Link to post Share on other sites
Florian Report post Posted March 8, 2008 RC10, winXP, UVP1 during the daytime all chars invisible in PL. char's shadows OK, names, health bars etc OK. as soon as it beccame night (3:30 ingame time) all chars reappeared. Share this post Link to post Share on other sites
Entropy Report post Posted March 8, 2008 Try this: http://www.eternal-lands.com/forum/index.p...st&p=425936 Share this post Link to post Share on other sites
Florian Report post Posted March 8, 2008 (edited) Try this: http://www.eternal-lands.com/forum/index.p...st&p=425936 I'll try that if all the actors suddenly drink invis pots in 35 mins /EDIT: looks like that fixes the problem, at least on WinXP Edited March 9, 2008 by Florian Share this post Link to post Share on other sites
LotusBlaze Report post Posted March 9, 2008 (edited) No problems with RC10 for me. UVP: 0 Video card: Intel 865G Vendor ID: Intel OpenGL Version: 1.3.0 - Build 4.14.10.4396. 3/10/08 Minor issue I've notice. When clicking harvestables like flowers the cursor gives me trouble. It will change to pickax harvesting cursor, then back to walk cursor. Difficult to get harvesting cursor to come up. Edited March 10, 2008 by LotusBlaze Share this post Link to post Share on other sites
Cruella Report post Posted March 9, 2008 (edited) Just an observation - when running the client in windowed mode, turning Compiled Vertex Array option on reduces fps immediately from over 40 to 7-8 on my laptop Edit : I'm not always able to reproduce it, sometimes it occurs, sometimes not (same place, same activity) Mostly visible while walking in Arius city, fps drops to 4 there is that option is enabled, goes up to 30 when disabled Edited March 9, 2008 by Cruella Share this post Link to post Share on other sites
Riton Report post Posted March 9, 2008 UVP1 after few testing day : Experiencing a lot more lag than with RC9 that worked really fine on my comp. Share this post Link to post Share on other sites
The_Piper Report post Posted March 9, 2008 (edited) UVP 1 Piper Edit: and a few resyncs during a good bow fight at votd with some players and sumoned creatures. Edited March 9, 2008 by The_Piper Share this post Link to post Share on other sites
Guest Boruta Report post Posted March 9, 2008 UVP 1 low fps, but stable on clean cvs client Video card: Radeon X1600 Series Vendor ID: ATI Technologies Inc. OpenGL Version: 2.1.7281 Release actual graphic driver: kmod-fglrx-2.6.23.15-137 Share this post Link to post Share on other sites
Requiem Report post Posted March 10, 2008 (edited) UVP: 0 Average FPS for my compter. 1 resync during an hour or two of the same bow fight as piper, no FPS drop before resync as if it was caused by lag. I did notice that after using a cross-bow to kill a player, my character did not appear to be able to move anymore (only on my client), but the actor coordinates were updated (ie: I couldent exit the map from where I was standing, but when I clicked on a tile near the exit, I could exit the map normally). everyone else saw my character move as normal, and after switching maps it was fixed. not sure if the walking animation was playing as I was attemping to walk or not. perhapse that should go under the 'bow and arrow testing' topic though. edit: DP lags pretty bad for me, however I havent noticed any considerable lag on any other large maps, and I dont have the setting that increases the walk range enabled. Edited March 10, 2008 by 1st Warrior Share this post Link to post Share on other sites
IamBritney Report post Posted March 10, 2008 (edited) I also have been running RC 10 since it came out with no problems until today. I was harvesting roses in EVTR and all of the sudden I got a pop up error message entitled: "Windows Visual C++ Runtime Library" with the following error message: "This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information" Each time I try to log in now I get this same message after I enter my password and can not get into game although a friend says they see me log on briefly and log off. I rebooted my machine and tried to log into game again but the same message appears. Any suggestions? I am running Vista if that matters at all. *Edited to say - I see others have had runtime errors but with so many pages I am not sure what the ultimate solution is, if one has been found. Sorry if this is a repeat post to problems others have. **Second edit to say that I had just entered basement which leads to mines in EVTR when error happened. Edited March 10, 2008 by IamBritney Share this post Link to post Share on other sites
Entropy Report post Posted March 10, 2008 Selective reading again, huh? Share this post Link to post Share on other sites
Superman Report post Posted March 10, 2008 (edited) #Edit - Nevermind Edited March 10, 2008 by Superman Share this post Link to post Share on other sites
IamBritney Report post Posted March 10, 2008 Not selective reading, just confusion as to which links fixed the runtime problem. Sorry. I uninstalled the game, reinstalled it from the website, installed the patch from the website, and then installed the two links in your first post and it is working again. Share this post Link to post Share on other sites
Entropy Report post Posted March 10, 2008 What Ent ment was, use the normal EL client, to get out of the map, then you can use the RC10 again, or download the patch.. And reading isnt so hard.. Is it? Actually, it's simpler than that, you just need to install the second exe I provided. Share this post Link to post Share on other sites
The_Piper Report post Posted March 11, 2008 I was testing my own CVS build client this evening. I was running across a lot of maps on the test server and had no crashes or any nasty behaviour. The only "problem" i had was, when i tried to shoot LarryStorch at KF while casting restore/the eye candy effect was still running. I got a few resyncs, thats all. Piper Share this post Link to post Share on other sites