Guest Remarco Report post Posted October 25, 2010 fps small then 20 i chek fps to 0 but nothing change... Quote Share this post Link to post Share on other sites
Entropy Report post Posted October 26, 2010 Post system specs. Quote Share this post Link to post Share on other sites
Guest RemarcO Report post Posted October 27, 2010 Post system specs. ------------------ System Information ------------------ Time of this report: 10/27/2010, 17:25:14 Machine name: Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_rtm.040803-2158) Language: English (Regional Setting: Latvian) System Manufacturer: NVIDIA System Model: AWRDACPI BIOS: Phoenix - AwardBIOS v6.00PG Processor: AMD Sempron Processor 2800+, MMX, 3DNow, ~1.6GHz Memory: 1536MB RAM Page File: 1238MB used, 5192MB available Windows Dir: C:\WINDOWS DirectX Version: DirectX 9.0c (4.09.0000.0904) DX Setup Parameters: Not found DxDiag Version: 5.03.2600.2180 32bit Unicode --------------- Display Devices --------------- Card name: ATI Radeon 9600 / X1050 Series Manufacturer: ATI Technologies Inc. Chip type: ATI Radeon Graphics Processor AGP (0x4152) DAC type: Internal DAC(400MHz) Device Key: Enum\PCI\VEN_1002&DEV_4152&SUBSYS_00001002&REV_00 Display Memory: 128.0 MB Current Mode: 1280 x 1024 (32 bit) (60Hz) Monitor: Plug and Play Monitor Monitor Max Res: 1600,1200 Driver Name: ati2dvag.dll Driver Version: 6.14.0010.6925 (English) DDI Version: 9 (or higher) Driver Attributes: Final Retail Driver Date/Size: 2/11/2010 07:45:14, 325120 bytes WHQL Logo'd: No WHQL Date Stamp: None VDD: n/a Mini VDD: ati2mtag.sys Mini VDD Date: 2/11/2010 10:38:10, 3565056 bytes Device Identifier: {D7B71EE2-0212-11CF-BF68-0A20A1C2CB35} Vendor ID: 0x1002 Device ID: 0x4152 SubSys ID: 0x00001002 Revision ID: 0x0000 Revision ID: 0x0000 Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch Registry: OK DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled DDraw Test Result: Not run D3D7 Test Result: Not run D3D8 Test Result: Not run D3D9 Test Result: Not run i hope this help you to resolve problem. when standing still and looking around on the ground is about 60-90 fps but when I move and censhos see where the fps drops to 11-20. #ping 261 ==> fps18 #ping 224 ==> fps22 Quote Share this post Link to post Share on other sites
RemarcO Report post Posted October 27, 2010 ping from PC ir ~70-80ms from game it from 180-<300ms Quote Share this post Link to post Share on other sites
