ninjalotus Report post Posted August 5, 2008 Hi this is guest_rob from the unregistered help I tried to pm a mod in forums to help me but it says I'm not allowed to do that.If a mod could pm me please that would be great so i can let you know my ip and such.Please help, thankyou very much. Quote Share this post Link to post Share on other sites
Thyralax Report post Posted August 6, 2008 As you have managed to post here, you should be able to forum pm a mod. However when you start loading el, do you get a red warning after its said GL_EXT_texture etc... using it ? Quote Share this post Link to post Share on other sites
ninjalotus Report post Posted August 7, 2008 No it just loads like normal saying connecting to server.... But i have pm'd a mod and waiting for reply. Quote Share this post Link to post Share on other sites
Usl Report post Posted August 10, 2008 (edited) No it just loads like normal saying connecting to server....But i have pm'd a mod and waiting for reply. The IP you sent me is not banned on the server. I suspect you might have a firewall (on your PC or upstream) blocking port 4000 2000; more so due to your machine also having a local IP 192.168.*.*, which means you are connected to a router (which also provides NAT) which, typically, include such a firewall. So, if you have firewall or antivirus software on your machine, review its configuration and make sure port 4000 2000 is open. If you have access to your upstream router, also check that, or otherwise ask the network administrator to do so. Failing that, I can only say your connection attempts do not reach the server (it's not that the server is blocking them), so there isn't much that can be done serverside. Edit: had the wrong port number in there, right one is 2000 for main server, 2001 for test server, 2002 for PK server. Edited August 11, 2008 by Usl Quote Share this post Link to post Share on other sites
ninjalotus Report post Posted August 11, 2008 Ok so i called my internet and router and had them open port 2000, still nothing.They asked wut was the MTU size for it.And also is that the only port needed and wut type (tpu ect.) Quote Share this post Link to post Share on other sites