LabRat Report post Posted February 27, 2008 I am using the last official release ATI catalyst drivers for my hardware. Omegadrivers crash my system during installation, so at some point in the near future I will need to reinstall windows and try on a clean installation. Share this post Link to post Share on other sites
love42 Report post Posted February 27, 2008 (edited) Video card: RADEON 9200 Series DDR x86/SSE2 Vendor ID: ATI Technologies Inc. OpenGL Version: 1.3.1072 WinXP Release My driver version is 6.14.0010.6614 from the ATI website. This is the newest driver for my card I have been able to find. Last time I checked I was unable to find a Omega driver for my card. el_pre_rc_26_02_07.exe crashes when I try to login. run el_pre_rc_26_02_07_no_vertex_programs.exe Seems to run ok. I have seen some of the terrain in Trassain flash a bit around cave entrances. Edited to add: If someone knows of an Omega driver for my card please let me know. Thanks Edited February 27, 2008 by love42 Share this post Link to post Share on other sites
Tempest Report post Posted February 27, 2008 I am using the last official release ATI catalyst drivers for my hardware. Omegadrivers crash my system during installation, so at some point in the near future I will need to reinstall windows and try on a clean installation. hehe i cant even play at all without them, i got RADEON x800 256mb PCIe x16, so its not a bad graphic card, but without the omega drivers EL doesnt even start, and now with them in the new client it doesnt seem to work as well either, anyway im trying new stuff but i just cant find out why it only lags (FPS lag, not ping) like i would have 5 el open, i got normal FPS lol. (75) Share this post Link to post Share on other sites
LeoI Report post Posted February 27, 2008 (edited) Video card: RADEON 9200 Series DDR x86/SSE2 Vendor ID: ATI Technologies Inc. OpenGL Version: 1.3.1072 WinXP Release both working fine except for a bit of lag now and then Edited February 27, 2008 by LeoI Share this post Link to post Share on other sites
Ozmondius Report post Posted February 27, 2008 BTW, those of you with ATI cards that have problems, do you have the Omega drivers or the standard drivers? Standard--I went through approximately 15 different omega drivers in December trying to solve the problem last time, and each of the produced an equal or worse result. Share this post Link to post Share on other sites
ShAnGmId Report post Posted February 27, 2008 (edited) Both PreRC crash within seconds of opening the client ( the blue bar wont fill up ) Video card : 760 VGA Vendor ID : SiS OpenGL Version : 1.4.0 Edited February 27, 2008 by ShAnGmId Share this post Link to post Share on other sites
draavell Report post Posted February 27, 2008 my 2 computers Laptop: Video card: GeForce4 420 Go/AGP/SSE2 Vendor ID: NVIDIA Corporation OpenGL Version: 1.5.4 http://www.laptopvideo2go.com -- downloads are not working atm, cant try any other drivers there Desktop: Video card: GeForce 6100/PCI/SSE2 Vendor ID: NVIDIA Corporation OpenGL Version: 2.1.2 got newest Nvidia driver this morning ForceWare version: 169.25 Both computers have same results: both .exe's run fine, just wont change the icon from walk Share this post Link to post Share on other sites
Entropy Report post Posted February 27, 2008 Ok, those of you with 'can't change the cursor' problem, can you tell me what desktop color depth you are using? I verified that 16bpp will cause it not to work, so try to switch to 24/32 bpp and see if it works. Share this post Link to post Share on other sites
Dilly Report post Posted February 27, 2008 Video card: Intel 965/963 Graphics Media Accelerator Vendor ID: Intel OpenGL Version: 1.5.0 - Build 7.14.10.1350 el_pre_rc_26_02_07.exe crashes when I try to login. run el_pre_rc_26_02_07_no_vertex_programs.exe runs, but very low fps and instead of a smooth walk, i get bumpy rides while moving around. Share this post Link to post Share on other sites
Lang_ren Report post Posted February 27, 2008 Video card: Intel 945GM Vendor ID: Intel OpenGL Version: 1.4.0 - Build 7.14.10.1409 el_pre_rc_26_02_07 ---Crashes when i try to log in. el_pre_rc_26_02_07_no_vertex_programs ---works fine. Lang- Share this post Link to post Share on other sites
Cajun Report post Posted February 27, 2008 Video Card: Intel 965/963 Graphics media accelerator Vendor ID:Intel Open GL version: 1.5.0 pre RC 7- crashed when logining in pre RC 7 no vertex--no problems yet Share this post Link to post Share on other sites
JohnnyFrog Report post Posted February 27, 2008 hp laptop running XP media centre edition driver version 8638 (from HP, not force updated to use the latest Nvidia driver) Video card: GeForce Go 7600/PCI/SSE2/3DNOW! Vendor ID: NVIDIA Corporation OpenGL Version: 2.0.1 el_pre_rc_26_02_07.exe ran first time no problems and seems stable Share this post Link to post Share on other sites
DaKiSS Report post Posted February 27, 2008 Greetings Video card: RADEON X800 GTO x86/SSE2 Vendor ID: ATI Technologies Inc. OpenGL Version: 2.0.5523 WinXP Release Last drivers (ATI Catalyst 5.12 8.192) installed. Results : Pre RC7 - Still crashing when loading ends Pre RC7 No vertex programs - Works fine (Haven't noticed any problems with interaction/uses/clics) Will edit if I found any problem. Share this post Link to post Share on other sites
draavell Report post Posted February 27, 2008 (edited) my 2 computers Laptop: Video card: GeForce4 420 Go/AGP/SSE2 Vendor ID: NVIDIA Corporation OpenGL Version: 1.5.4 http://www.laptopvideo2go.com -- downloads are not working atm, cant try any other drivers there Desktop: Video card: GeForce 6100/PCI/SSE2 Vendor ID: NVIDIA Corporation OpenGL Version: 2.1.2 got newest Nvidia driver this morning ForceWare version: 169.25 Both computers have same results: both .exe's run fine, just wont change the icon from walk I was using 16 bit depth for both, switched to 32 bit and both work. On the Laptop it runs smooth with vertex options on or off, both .exe's. On the Desktop it seems a little choppy when my character walks, looks like the camera follow is whats making it look choppy but other characters looked a little choppy as they walked by when I was standing still, vertex options on or off, both .exe's. Edited February 27, 2008 by draavell Share this post Link to post Share on other sites
tiny1 Report post Posted February 27, 2008 With vertex crashed on my tower Video Card: VISIONTEX Xtasy RADEON 9250 PCI If el_pre_rc_26_02_07_no_vertex_programs.exe doesn't crash, but el_pre_rc_26_02_07.exe does crash, do a #glinfo and post the first 3 lines here (not the whole thing!) Supported extensions: GL_ARB_multitexture GL_EXT_texture_env_add GL_EXT_compiled_vertex_array GL_S3_s3tc GL_ARB_occlusion_query GL_ARB_point_parameters GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine Share this post Link to post Share on other sites
Cruella Report post Posted February 27, 2008 Video card: GeForce Go 7600/PCI/SSE2 Vendor ID: NVIDIA Corporation OpenGL Version: 2.1.0 el_pre_rc_26_02_07.exe started in a full screen mode works perfectly during switching to window mode (Alt+Enter) the client either crashes or all characters are either not visible or are displayed incorrectly attempt to go back to full screen mode or attempt to change the map crashes the client every time Share this post Link to post Share on other sites
tiny1 Report post Posted February 27, 2008 With vertex crashed on my tower Video Card: VISIONTEX Xtasy RADEON 9250 PCI If el_pre_rc_26_02_07_no_vertex_programs.exe doesn't crash, but el_pre_rc_26_02_07.exe does crash, do a #glinfo and post the first 3 lines here (not the whole thing!) Supported extensions: GL_ARB_multitexture GL_EXT_texture_env_add GL_EXT_compiled_vertex_array GL_S3_s3tc GL_ARB_occlusion_query GL_ARB_point_parameters GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine doesnt wanna know the stuff in white [tiny1 @ guild]: k i update Video card: RADEON 9200 Series DDR x86/SSE2 Vendor ID: ATI Technologies Inc. OpenGL Version: 1.3.1072 WinXP Release] Share this post Link to post Share on other sites
Sheesh Report post Posted February 27, 2008 Updated my drivers right before I tried this. Video card: GeForce 6100/PCI/SSE2/3DNOW! Vendor ID: NVIDIA Corporation OpenGL Version: 2.1.2 el_pre_rc_26_02_07.exe works fine el_pre_rc_26_02_07_no_vertex_programs works fine also but says I need to update my drivers (am on most updated driver I can get) Share this post Link to post Share on other sites
Entropy Report post Posted February 27, 2008 Updated my drivers right before I tried this. Video card: GeForce 6100/PCI/SSE2/3DNOW! Vendor ID: NVIDIA Corporation OpenGL Version: 2.1.2 el_pre_rc_26_02_07.exe works fine el_pre_rc_26_02_07_no_vertex_programs works fine also but says I need to update my drivers (am on most updated driver I can get) Are you 100% sure it tells you to update the drivers after you updated them? Can you try again? Share this post Link to post Share on other sites
Link Report post Posted February 27, 2008 Updated my drivers right before I tried this. Video card: GeForce 6100/PCI/SSE2/3DNOW! Vendor ID: NVIDIA Corporation OpenGL Version: 2.1.2 el_pre_rc_26_02_07.exe works fine el_pre_rc_26_02_07_no_vertex_programs works fine also but says I need to update my drivers (am on most updated driver I can get) Are you 100% sure it tells you to update the drivers after you updated them? Can you try again? It does the same for me too, though i'm 100% sure i have the latest drivers Share this post Link to post Share on other sites
conavar Report post Posted February 28, 2008 (edited) I have had no problems with any of the pre RC's and the latest two both work fine... but I get the " need newer driver msg " with the no_vertex_programs one (and no msg on the normal exe or any of the other previous Rc's). I just took that as because I wasnt using the vertex programs it thought it was my drivers fault and I needed a newer one. Maybe im wrong ? Edited February 28, 2008 by conavar Share this post Link to post Share on other sites
macca Report post Posted February 28, 2008 (edited) BTW, those of you with ATI cards that have problems, do you have the Omega drivers or the standard drivers? Video card: RADEON 9200SE DDR x86/SSE2 Vendor ID: ATI Technologies Inc. OpenGL Version: 1.3.1050 WinXP Release driver version: Gigabyte radeon 9200se series i've tried the omega radeon drivers before several times and always seem to have more problems with them. edit: el_pre_rc_26_02_07.exe crashes el_pre_rc_26_02_07_no_vertex_programs.exe loads but with most textures flickering Edited February 28, 2008 by macca Share this post Link to post Share on other sites
Sheesh Report post Posted February 28, 2008 Updated my drivers right before I tried this. Video card: GeForce 6100/PCI/SSE2/3DNOW! Vendor ID: NVIDIA Corporation OpenGL Version: 2.1.2 el_pre_rc_26_02_07.exe works fine el_pre_rc_26_02_07_no_vertex_programs works fine also but says I need to update my drivers (am on most updated driver I can get) Are you 100% sure it tells you to update the drivers after you updated them? Can you try again? Tried again and here is what I get: el_pre_rc_26_02_07.exe el_pre_rc_26_02_07_no_vertex_programs Same results as before Share this post Link to post Share on other sites
Entropy Report post Posted February 28, 2008 Oh, nvm, just ignore that. Share this post Link to post Share on other sites
Arbitrage Report post Posted February 29, 2008 crash on both & all prev rc's, i apologize for the verbosity but hope it's useful #glinfo: [01:52:01] Video card: Intel 915GM [01:52:01] Vendor ID: Intel [01:52:01] OpenGL Version: 1.4.0 - Build 7.14.10.4764 [01:52:01] Supported extensions: GL_ARB_depth_texture GL_ARB_fragment_program GL_ARB_multitexture GL_ARB_point_parameters GL_ARB_shadow GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_env_crossbar GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_EXT_cull_vertex GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture_compression_s3tc GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_filter_anisotropic GL_EXT_texture3D GL_3DFX_texture_compression_FXT1 GL_IBM_texture_mirrored_repeat GL_NV_blend_square GL_NV_texgen_reflection GL_SGIS_generate_mipmap GL_WIN_swap_hint log on start: el_pre_rc_26_02_07.exe & other: [02:21:12] Window size adjusted to 780x550 [02:21:12] Hmm... This mode seems to fall back in software 'acceleration'. Trying to disable the stencil buffer. [02:21:16] Window size adjusted to 780x550 [02:21:16] Hmm... This mode seems to fall back in software 'acceleration'. Trying to disable the stencil buffer . ver 1.5.0 beta: [02:27:00] Window size adjusted to 780x550 [02:27:00] Hmm... This mode seems to fall back in software 'acceleration'. Trying to disable the stencil buffer. [02:27:00] GL_ARB_multitexture extension found, using it. [02:27:00] GL_ARB_texture_env_combine extension found, using it. [02:27:00] GL_EXT_compiled_vertex_array extension found, using it. [02:27:00] GL_ARB_point_sprite extension found, using it. [02:27:00] GL_ARB_texture_compression extension found, using it. [02:27:00] GL_EXT_texture_compression_s3tc extension found, using it. [02:27:00] GL_SGIS_generate_mipmap extension found, using it. [02:27:00] GL_ARB_shadow extension found, using it. [02:27:00] GL_ARB_vertex_buffer_object extension found, using it. [02:27:00] Couldn't find the GL_EXT_framebuffer_object extension, not using it... [02:27:00] GL_EXT_draw_range_elements extension found, using it. [02:27:00] Couldn't find the GL_ARB_texture_non_power_of_two extension, not using it... [02:27:00] GL_ARB_fragment_program extension found, using it. [02:27:00] GL_ARB_vertex_program extension found, using it. [02:27:00] Couldn't find the GL_ARB_fragment_shader extension, not using it... [02:27:00] Couldn't find the GL_ARB_vertex_shader extension, not using it... [02:27:00] Couldn't find the GL_ARB_shader_objects extension, not using it... [02:27:00] Couldn't find the GL_ARB_shading_language_100 extension, not using it... [02:27:00] Couldn't find the GL_ARB_texture_mirrored_repeat extension, not using it... [02:27:00] Couldn't find the GL_ARB_texture_rectangle extension, not using it... [02:27:00] GL_EXT_fog_coord extension found, NOT using it... [02:27:00] Couldn't find the GL_ATI_texture_compression_3dc extension, not using it... [02:27:00] Couldn't find the GL_EXT_texture_compression_latc extension, not using it... [02:27:00] Error opening sound configuration file Share this post Link to post Share on other sites